Gateway Engineering Education Coalition

ENVIRONMENTAL ENGINEERING

The Environmental Engineering CID of the Gateway coalition is developing a rich variety of "course modules" in selected impact areas that will support environmental education at a wide variety of universities independently of how their programs are organized. "Course modules" are packages of information that can be used to occupy approximately one to two weeks of course time (3 to 6 class periods plus assignments) and can be used to enrich existing environmental courses, can be combined to build new courses, and can be applied in innovative educational approaches such as freshman design team projects. The following "impact areas" were selected for academic year 1995-96:

Solid and Hazardous Waste
Water/Wastewater Treatment & Environmental Chemistry
Air Pollution
Environmental Hydraulics & Water Resources

The goal of the Environmental Engineering CID is to package educational resources in exciting new ways so they may be shared among Environmental curricula within and beyond the Gateway.

There are 29 projects in this section.

1. A Shared Resource Module for Environmental Engineering Education Description:This publication contains documentation on a series of Environmental Engineering "Shared Resources" modules that resulted from a three -year
2. Air Pollution Transport Teaching Module based on Gaussian Mo Description:Air Pollution Transport Teaching Module based on Gaussian Models 1.1 and Mathcad 6.0. Course Module Notebook contains Introduction, helpful
3. An Air Pollution Transport Teaching Module based on Gaussian Description:An Air Pollution Transport Teaching Module based on Gaussian Models 1.1. (Reprint of a Refereed Journal Publication)
4. Beta Test Report on Description:Beta Test Report on "Siting a Municipal Landfill in a Residential Community" with notations on the original document.
5. Beta Test Report on Description:Beta Test Report on "SuperPro Designer Software and 6 modules"
6. Beta Test Report on Description:Beta Test Report on "2 Dimensional Groundwater Bioremediation Based on BIOPLUME II and BIOPLOT"
7. Beta Test Report on Description:Beta Test Report on "Site selection and analysis of a wastewater treatment plant facility"
8. Beta Test Report on Description:Beta Test Report on "Planning and siting a Manufacturing Facility using hazardous Materials"
9. Beta Test Report on Description:Beta Test Report on "Evaluating Air Quality Impacts on a Residential Community in direct proximity to a proposed highway"
10. Beta Test Report on Drainage Using HEC-1 Description:Beta Test Report on Drainage Using HEC-1 with notations on the original document.
11. Beta Test Report on Drainage Using HEC-RAS Description:Beta Test Report on Drainage Using HEC-RAS with notations on the original document.
12. Bioremediation Teaching Module based on BIO1D Description:A Bioremediation Teaching Module based on BIO1D. (Reprint of a Refereed Journal Publication)
13. Case Studies: Remediation of Contaminated Site and Low-level Description:Case Studies: Remediation of Contaminated Site and Low-level Radiative Waste Disposal Facility. Power Point slides on Radiation Basics are
14. Cleveland Combined Sewer Overflow Case Study Description:Cleveland Combined Sewer Overflow Case Study. Authorware module of enviro case study. (2 disks) Material to be used in a course for freshm
15. Drainage Using HEC-1 Description:This study consists of a learning module for undergraduate environmental or civil engineering students. A state of the art computer program
16. Environmental Design/ Manufacturing Management Description:The goal of the Environmental Design/Manufacturing Management (EDMM) project is to examine real-world practices of the harmonious placement
17. Environmental Engineering Across The Engineering Curriculum; Classroom Case Studies and Database Application Description:This project is a compilation of chemical concentration data from several treatment facilities. They range from local municipalities to indu
18. Environmental Engineering Teaching Modules Description:These teaching modules have been developed in the areas of air pollution, water pollution, wastewater treatment, hazardous waste management,
19. Everglades Case Study Description:This course introduces the student to the Everglades National Park, its flora, fauna, history and hydrolog, along with the more general topi
20. Everglades Information Network and Everglades Digital Library Description:Considered a major matching effort by Florida International Libraries and the Everglades National Park, South Florida Natural Resource Cente
21. GIS Applications in Various Disciplines with emphasis on Environmental Engineering Description:The software (CD-ROM) selected and purchased, as per the project proposal, for the purpose of immediate implementation of GIS applications i
22. Hydraulic Barrier Design Teaching Module Based on HELP 3.0 Description:A Hydraulic Barrier Design Teaching Module Based on HELP 3.04 and HELP Model for Windows v2.50. (Reprint of a Refereed Journal Publication)
23. Lab Manual for Fundamentals of Engineering Design Description:A Lab Manual for Fundamentals of Engineering Design. Includes Basic Concepts for Measurements & Analysis of Measured Data and description o
24. NJIT Experience in Fundamentals of Engineering Design Description:NJIT Experience in Fundamentals of Engineering Design and Freshman Engineering Courses. Disciplinary and Interdisciplinary Orientated Fresh
25. Planning & Siting of a Manufacturing Facility using Hazardous Materials Description:Planning & Siting of a Manufacturing Facility using Hazardous Materials-Course Materials including Intro., Siting a Facility, Aspirin Manuf.
26. Shared Resources Description:Senoir and Graduate level students of The Cooper Union and the co-PI beta tested various course modules received from the Polytechnic Univer
27. Software Modules for Environmental Engineering Education Description:Software Modules for Environmental Engineering Education. Paper presented at the International Conference ENVIROSOFT 96, in Como, Italy
28. SuperPro Designer Software Instructional Module Description:SuperPro Designer Software Instructional Module. This is a supplement to the SuperPro Designer User's Manual. It provides more detailed pr
29. Vapor Extraction Teaching Module based on AIRFLOW/SVE Description:A Vapor Extraction Teaching Module based on AIRFLOW/SVE. (Reprint of a Refereed Journal Publication)